348 roll bar fixing help | FerrariChat
Buy

348 roll bar fixing help

Discussion in '348/355' started by wda24729, Nov 8, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. wda24729

    wda24729 Formula 3

    Sep 22, 2014
    1,000
    Devon, UK
    Full Name:
    Graham
    #1 wda24729, Nov 8, 2015
    Last edited by a moderator: Sep 7, 2017
    Im doing a front end refurb, all going well but the stud fixing the roll bar bushes have all rotated and required to be cut out. Ive managed to save one but now found out they are NLA.

    Its part number 14672491. Before I get them fabricated, anyone any suggestions for an alternative source?

    Many thanks

    http://www.ferrarichat.com/forum/attachment.php?attachmentid=2155021&stc=1&d=1446973288

    http://www.ferrarichat.com/forum/attachment.php?attachmentid=2155022&stc=1&d=1446973288
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,224
    Mount Isa, Australia
    Full Name:
    Pap
    #2 PAP 348, Nov 8, 2015
    I think Ricambi lists them for US $2.54 each man and they look to be available.

    Daniel from Ricambi is a member here, hopefully he will get in touch with you soon and let you know if they are available.

    14672491 SCREW - Ricambi America, Inc.
     
  3. wda24729

    wda24729 Formula 3

    Sep 22, 2014
    1,000
    Devon, UK
    Full Name:
    Graham
    #3 wda24729, Nov 8, 2015
    Cool - Beats the original cost of $10.34 over here then. I'll get in contact with them. Many thanks
     
  4. ///Mike

    ///Mike F1 Veteran

    Dec 11, 2003
    6,097
    Bugtussle
    #4 ///Mike, Nov 8, 2015
    Make sure to bathe the new ones in plenty of anti-seize paste when installing. I'd suggest using stainless nylock nuts as well. Good luck!
     
  5. wda24729

    wda24729 Formula 3

    Sep 22, 2014
    1,000
    Devon, UK
    Full Name:
    Graham
    #5 wda24729, Nov 8, 2015
    Always part of my routine, you'll note the hole already lubed up with copper grease aswell!
     
  6. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,224
    Mount Isa, Australia
    Full Name:
    Pap
    #6 PAP 348, Nov 8, 2015
    Cool man, take care and enjoy. :)
     
  7. wda24729

    wda24729 Formula 3

    Sep 22, 2014
    1,000
    Devon, UK
    Full Name:
    Graham
    #7 wda24729, Nov 10, 2015
    Confirmed NLA! :( Have to get some fabricated I guess
     
  8. wda24729

    wda24729 Formula 3

    Sep 22, 2014
    1,000
    Devon, UK
    Full Name:
    Graham
    #8 wda24729, Nov 11, 2015
    Last edited by a moderator: Sep 7, 2017

Share This Page