348 Rotor removal | FerrariChat
Buy

348 Rotor removal

Discussion in '348/355' started by adsphelan, Dec 15, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. adsphelan

    adsphelan Karting

    Nov 11, 2005
    54
    #1 adsphelan, Dec 15, 2006
    I replaced my brakes pad today what an easy job. I was going to turn my rotors, but after trying to remove the rotor has stuck I used a dead hammer and still could not get the rotor off. The rotor's were not in that bad of shape so I just replaced the brakes. After braking in the brakes I have more noise than the old pair. Any ideas on getting the rotors off.
    Dale
     
  2. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    #2 gothspeed, Dec 15, 2006
    There should be two 8mm bolts that hold each rotor on. Don't touch the center "big nut". You will also need to remove the brake caliper. :)
     
  3. plugzit

    plugzit F1 Veteran
    Silver Subscribed

    Dec 1, 2004
    7,751
    Redondo Beach, CA
    Full Name:
    Bruce Bogart
    #3 plugzit, Dec 15, 2006
    Dale-the first time I changed my pads, I didn't realize they were "directional" and I got a godawful squeal from them. Maybe that's what's up with the noise.
     

Share This Page