348 side shields

Here you go.

348 Fender Shield Placement

Using the crease that runs along the fender as your guide, the upper right hand corner of the shield should be 1.5" below the crease straight below 4" along the crease from the door/fender joint. The left corner should be 1.75" below the crease from a point 7.5" along the crease from the door. Reverse all measurements for a passenger side.


Jeff
Image Unavailable, Please Login

 

There really is no 348 'proper shield placement', since 348s were never offered with shields.

 

+1, this is true

But for reference, here's my 355 factory placement
Image Unavailable, Please Login

 

True, but if you are into having shields on your 348 and not hung up on technicalities.
The specs I list are about as nice a placement as you will get.
Image Unavailable, Please Login

 

The only 348 that I am aware came with shields was the 348 Competizione.

 

goog info boys

 

I did not know that. Why is it that all 348's (except for the SS) have these then?

 

Excellent!! Thanks mate!

Yep, that is correct!

Because "we" fit them!

 

I see...thanks PAP.

 

Image Unavailable, Please Login

 

AGAIN?!? WFT?!?

 

Again, "What?? Its a laughing dog".

 

Good stuff - much appreciated.