348 Spark Plug Extenders Needed... | FerrariChat
Buy

348 Spark Plug Extenders Needed...

Discussion in '348/355' started by BeachBum, Jun 17, 2013.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. BeachBum

    BeachBum Formula 3

    Dec 9, 2003
    2,058
    The Beach of Course
    #1 BeachBum, Jun 17, 2013
    Last edited by a moderator: Sep 7, 2017
    Hey Guys. I'm in the process of replacing my spark plug wires on the 348. I'm using new wire and saw tooth connectors but trying to reuse the plug ends. Unfortunately 4 of the plug extenders have heavy corrosion on the inside of the wire end and are not usable. Soooo if anybody out there has an old set of plug wires that I could cannibalize for the plug extenders or 4 good plug extenders lying about I sure could use them. I've looked just about everywhere and nobody sells them without the wires. Any help would be greatly appreciated.

    1st pic is the saw tooth connector that came out of the old plug extender. I'm surprised it was running as good as it was.

    2nd pic is the plug extenders I need. If you have the rubber boot I could use that to. I need 4.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    6,016
    Indio Ca/ Alberta
    Full Name:
    Grant
    #2 taz355, Jun 17, 2013
    I know you asked about plug extenders but a few people have just bought all new and I did not think it was more than a few hundred dollars from kingsborn or something like that. I know Uconnhusky was one of them.
     
  3. BeachBum

    BeachBum Formula 3

    Dec 9, 2003
    2,058
    The Beach of Course
    #3 BeachBum, Jun 17, 2013
    If I didn't have the new plug wires 90% completed already I would just buy a new set. So I figured it was worth asking. From the looks of things I may have to buy the new set anyway.
     

Share This Page