348 Spark plug wires. | FerrariChat

348 Spark plug wires.

Discussion in '348/355' started by Michael Everson, May 26, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Michael Everson

    Michael Everson Karting

    Nov 5, 2005
    224
    Norton, MA USA Earth
    Full Name:
    Michael Everson
    I am trying to locate a set of spark plug wires for my 348. I brought the car in for a PPI for a interested customer. After they did the PPI the car ran like crap. they said it was because the pulled the wires and disturbed them. Sounds plausible and reasonable. Where is the best place to get wires for this car? I have seen some crazy prices for these. Are they really that expensive?
    Mike
     
  2. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,044
    USA
    Daniel is a great guy, and the Cavis are good...but I like these www.kingsborne.com about $230, they use the factory Beru connectors on each end, and 8mm wire instead of the original 7mm. The can do colors to, though I went with black to retain an oem look. Work great on my 355.
     
  3. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    There goes your $300 commission check. :(




    Just kidding.




    I probably would have only paid you $12.31
     
  4. jjstecher

    jjstecher Formula Junior

    Jan 21, 2002
    962
    Rochester Minnesota
    Full Name:
    John Stecher
    Dont want to shoot Daniel here but I run Magnecor's which you can get in flexible 8.5mm to fit the current looms and costs nothing compared to stock.

    http://www.magnecor.com/

    If I ever get around to my CoP's conversion I will switch but for now this stuff is working.
     
  5. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,044
    USA
    But I am placing an order for a speedo sender for a 355 tonight!! ;)
     
  6. davey_jones

    davey_jones Formula Junior

    Sep 28, 2002
    781
    wherever it's sunny
    Full Name:
    Dave
    I just yanked the Magnecor wires out tonight. Got the new Kinsgborne wires - man those things are a nice snug fit too! Kinda reminds me of when uh err um..nevermind
     
  7. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    18,044
    USA
    Yeah, if you compare (at least on the 355 application) the Beru plug extension now has three seals, where the oem Beru plug extension only had one. So it takes more effort to get those three sealing rings to seat in the plug hole.
     

Share This Page