348 Spider Seats

I'm looking to replace my seats in my 348 Spider. Can you guys show me pictures of seats you have installed in your 348 Spider. Would a set of 360 Spider Daytona seats fit? I think they have to be made for a Spider because of the seat belt attached to the seat. Any suggestions.

Thanks

 

I am lucky enough to have a set of the SS/F40 seats in mine.
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

what is your reason for changing the oem seats? I changed mine to 355 spider seats because they were more comfortable on long journeys.

 

arent 348 spider and 355 spider seats the same

 

no they are slightly different, particularly in the all important posterior width, away from the car at the mo, so unable to take photographs. They are interchangable however.

 

The 355 seats are powered. The 348 aren't.

 

I'm looking to change them because the driver seat is all warn. I am looking into getting them redone but I thought I would check to see what is out there.

 

we're talking about the actual seat, not if it is powered or no. The seats are interchangable, the seat rails just need swopping over, I've done it for two reasons one for comfort and secondly the drivers rake adjustment went through a modification which prevented it from failing.

Hope that helps you out, come back if you have any other queries.

 

part of issue I was facing, it all depends on the amount of money you feel is worth spending. In the end not only did I swop over the seats but had them recovered as well as all the other tan leather, just to keep it all looking the same, once one part is changed it makes all the other parts look out of wack. The black leather looked ok so kept that original. Needless to say I have a black spider with tan/black leather and black carpet interior.

 

Me too...

Kai