348 toe, caster, camber, adjustments | FerrariChat
Buy

348 toe, caster, camber, adjustments

Discussion in '348/355' started by RAYMAN, Jun 28, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. RAYMAN

    RAYMAN Formula Junior
    BANNED

    Mar 10, 2004
    315
    Oklahoma
    Full Name:
    Raymond Santilli
    #1 RAYMAN, Jun 28, 2004
    The rear wheels have a noticable "toe in" looking down on them. If I were to make an adjustment, exactly what bolts do you turn for the adjustments.

    Is it normal for a substantial toe in on 348's. this car is not going to be tracked.
     
  2. Kevallino

    Kevallino Formula 3

    Feb 10, 2004
    2,257
    Mid-Ohio
    Full Name:
    Kevin
    #2 Kevallino, Jun 28, 2004
    I think it might be a function of the bodywork rather than toe in. Looking at mine it looks like the front part of the rear wheel is tucked way behind the fender while the rear hangs out, but I think they are all like that!!

    Cheers
    Kevin
     
  3. Ferrari_tech

    Ferrari_tech Formula 3

    Jul 28, 2003
    1,527
    UK
    Full Name:
    Malcolm W
    #3 Ferrari_tech, Jun 29, 2004
    The rear toe on the 348 is between 2.5mm - 3.5mm, this can depend on the type of tyre you are running and your own personal "set-up" for your style of driving. Bear in mind that both wheels should toe-in the same amount and don't rely on looking at the bobywork for the alignment of each wheel.

    If you haven't got the equipment for checking it then it's best done at your local tyre shop.
     

Share This Page