348 ts/gts | FerrariChat

348 ts/gts

Discussion in '348/355' started by Starsky, Mar 17, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Starsky

    Starsky Karting

    Joined:
    Jan 22, 2006
    Messages:
    66
    Location:
    Galicia (Spain)
    Full Name:
    Marco
    Hi !
    I would like to know if it's frequent that dealers sell the 348 tb/ts as gtb/gts...
    I'm looking for a 348 gts and I want to be sure I will purchase a real one, not a fake one.
    What's the easiest way to be sure ?
    This thread has probably already been posted but I can't find it.
    Thanks.
     
    Starsky, Mar 17, 2006
    #1
  2. jtremlett

    jtremlett F1 Rookie

    Joined:
    Feb 18, 2004
    Messages:
    4,791
    Yes it happens all the time. There is also the occasional tb/ts with GTB/GTS badging. You'd need to check the chassis number or the documentation with the car etc.

    Jonathan
     
    jtremlett, Mar 17, 2006
    #2
  3. AR!

    AR! Formula Junior

    Joined:
    Apr 8, 2004
    Messages:
    981
    Location:
    Berlin, Germany
    AR!, Mar 17, 2006
    #3
  4. bob348

    bob348 Formula 3

    Joined:
    Apr 13, 2004
    Messages:
    1,553
    Location:
    Liege, Belgium
    Full Name:
    Geoffrey
    bob348, Mar 17, 2006
    #4
  5. Starsky

    Starsky Karting

    Joined:
    Jan 22, 2006
    Messages:
    66
    Location:
    Galicia (Spain)
    Full Name:
    Marco
    Thanks a lot for the tips and the pics !
     
    Starsky, Mar 17, 2006
    #5
  6. 348hire

    348hire Rookie BANNED

    Joined:
    Mar 20, 2006
    Messages:
    1
    348hire, Mar 20, 2006
    #6
  7. Llenroc

    Llenroc F1 Veteran Rossa Subscribed

    Joined:
    Jun 9, 2004
    Messages:
    5,488
    Location:
    Colorado
    Full Name:
    Vern
    Serial No. should be around the 91000 up to 98000 range. As you probably know they were produced in '93-'94 in Europe and only in '94 in the US. Also as was said above the manifold would be a good place to start for proof. There weren't very many imported to the US and the ones that were I don't think had that newer manifold. Regards, Vern
     
    Llenroc, Mar 20, 2006
    #7

Share This Page