348 Windscreen washer

My Windscreen washer is not operating before to de assembly I would like to ask if somebody knows where is located the fuse or the relay. Thanks in advance.

 

The wiring diagram does not show that there is a fuse or a relay in the circuit for the windshield washer. It should be easy to do a check with a test light to see if you are getting power to the pump. If not, there is either a problem in the switch or in the wiring between the switch and the pump.

 

Thanks but for that I need to de assembly the carpet to have the acces of the pump.

 

Actually, you can get at the wiring plug for the washer pump in less than five minutes, without removing the entire trunk liner. Just undo the two liner screws next to the access panel for the washer tank, pull up the rubber trunk seal on that corner, and undo the two easily accessable nuts that hold the tank in place. You can then tilt the tank up to reveal the pump and its wires. If you have to remove the tank, you have to get the third nut off, and it's not as easy to reach without removing the liner.
Image Unavailable, Please Login