348tb emergency flashers | FerrariChat
Buy

348tb emergency flashers

Discussion in '348/355' started by Delphia37, Feb 22, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Delphia37

    Delphia37 Karting

    Feb 22, 2008
    56
    Vancouver, BC
    Full Name:
    Don
    #1 Delphia37, Feb 22, 2008
    Is the 'emergency flasher' button on the console supposed to be backlit like the 'foglight', 'rear window defost', and 'parklight' buttons are right beside it?
    Any info would be great.
    Thanks,
    Don
     
  2. 3forty8

    3forty8 F1 Rookie
    Owner

    Apr 25, 2006
    2,713
    San Diego
    Full Name:
    Eric
    #2 3forty8, Feb 22, 2008
    Yes, hazard button is backlit when headlights are turned on (U.S. model 348).
     
  3. Delphia37

    Delphia37 Karting

    Feb 22, 2008
    56
    Vancouver, BC
    Full Name:
    Don
    #3 Delphia37, Feb 23, 2008
    Hi Bubs,
    Thanks for the info.... how would i fix it? Any ideas?
    Don
     
  4. Delphia37

    Delphia37 Karting

    Feb 22, 2008
    56
    Vancouver, BC
    Full Name:
    Don
    #4 Delphia37, Feb 23, 2008
    If the emergency flasher button is supposed to be backlit when the headlights are turned on .... is the fuel door relaese button supposed to be backlit as well?
    Thanks in advance to anyone that can enlighten me.... no pun intended!
    Don
     
  5. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    #5 Miltonian, Feb 23, 2008
    Hi, Don. Congratulations on your 348, and welcome to Ferrari Chat.

    On my 348, the emergency flasher button IS backlit, and the fuel lid door release button IS also backlit. I think these have little LED bulbs in them though, not conventional bulbs. Doesn't ND have a thread about replacing these? Otherwise, you have to replace the switch.
     
  6. Delphia37

    Delphia37 Karting

    Feb 22, 2008
    56
    Vancouver, BC
    Full Name:
    Don
    #6 Delphia37, Feb 23, 2008
    Hi Jeff,
    Thanks for your kind words .... and info. I kinda figured that those two buttons should be backlit. I am new to this so forgive me for asking... but what is ND? I would really like to get these two buttons lit like they should be.
    Thanks again,
    Don
     
  7. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    #7 Miltonian, Feb 23, 2008
    ND is FChat member "No Doubt", who has an enormous 348 resource site. Haven't you seen that yet? Someone (I THINK it was ND) had a thread recently about replacing the LED's in the switches. They're soldered in IIRC.
     
  8. TheOnlyest

    TheOnlyest Formula 3

    Sep 25, 2007
    1,686
    Las Vegas Nevada, US
    Full Name:
    Steve
    #8 TheOnlyest, Feb 23, 2008
  9. Delphia37

    Delphia37 Karting

    Feb 22, 2008
    56
    Vancouver, BC
    Full Name:
    Don
    #9 Delphia37, Feb 23, 2008
    Hi Jeff,
    I did come across a lot of No Doubt's helpful tips as i was browsing this evening. Thanks for pointing me in a useful direction.

    Hi Steve,
    Thanks for your great write up on the led conversion. It is written so well i might even give it a whack myself! If i chicken out would you consider fixing a Canadian's module? Unfortunately i have both a 'fuel door' button in the lower console AND a 'hazard light' button in the upper console burnt out! Why couldn't they be in the same module??!! Rats!

    Thanks guys,
    Don
     
  10. TheOnlyest

    TheOnlyest Formula 3

    Sep 25, 2007
    1,686
    Las Vegas Nevada, US
    Full Name:
    Steve
    #10 TheOnlyest, Feb 23, 2008
    Yea, ill do it for ya... but you've gotta say 3 times... "RED WINGS RULE!!!"
     
  11. Delphia37

    Delphia37 Karting

    Feb 22, 2008
    56
    Vancouver, BC
    Full Name:
    Don
    #11 Delphia37, Feb 24, 2008
    Red Wings rule???!!!
    I'll to fix it myself first.
    :)

    Don
     

Share This Page