355 another annoying problem solved. | FerrariChat
Buy

355 another annoying problem solved.

Discussion in '348/355' started by eyboro, Aug 29, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. eyboro

    eyboro Formula Junior
    Silver Subscribed

    May 30, 2004
    989
    Chicago
    Full Name:
    Eitan
    #1 eyboro, Aug 29, 2010
    Last edited by a moderator: Sep 7, 2017
  2. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,232
    Mount Isa, Australia
    Full Name:
    Pap
    #2 PAP 348, Aug 29, 2010
    Nice find mate! :D:D

    If Daniel hasnt got one, maybe have that one repaired? :):)

    And that is a BIG hole. Car must have been running like ****? :eek::eek:
     
  3. mwhitesell

    mwhitesell Formula 3

    Sep 17, 2006
    1,083
    Atlanta
    Full Name:
    Mark
    #3 mwhitesell, Aug 30, 2010
    I had to have that same part welded. It threw a 1448 as well.
     
  4. eyboro

    eyboro Formula Junior
    Silver Subscribed

    May 30, 2004
    989
    Chicago
    Full Name:
    Eitan
    #4 eyboro, Aug 30, 2010
    I fixed the hole with a special pipe wrap material but being a perfectionist I still ordered a new pipe from Daniel at Ricambi.
     
  5. Mitch Alsup

    Mitch Alsup F1 Veteran

    Nov 4, 2003
    9,741
    #5 Mitch Alsup, Aug 30, 2010
    Part like that can be soldered, silver soldered, brased, or welded.
     
  6. saw1998

    saw1998 F1 Veteran

    Jun 8, 2008
    8,237
    San Antonio, Texas
    Full Name:
    Scott
    #6 saw1998, Aug 30, 2010
    There was an earlier thread about this problem. Sorry, can't remember who was the OP. It seems these two parts have a tendency to rub on the cam covers or cam sensors if not properly oriented.
     

Share This Page