355 Challenge Spare Parts Commune!

So I am sending down a used, spare front wheel bearing assy. to Daytona, and plan to leave it on the Pocono Truck for the rest of the season. I am replacing the front rotors so I will throw the spare one in the bin as well. As Colin and I discussed at Sebring, I think we 355-ers should try and get a fairly complete kit to share. Any suggestions on a minimum list everyone?

 

I will have a starter and an alternator with me and Rob is going to bring my spare battery. Of we could find one, I would like to have a MAF and a coolant fan. All the rest of the stuff that could break would involve some heavy wrenching.

 

I also have a bag of used wheel studs and a few wheel nuts that I will bring with me to each event. Breaking a wheel stud is more common that you might think.

Should someone want to do track side adjustments, I have a box of shims to change camber and toe.

I have a full set of lightly used brake rotors that I could also bring. Also lots of lightly used Pagid Orange brake pads, but they are very old. They were Milka Duno's. I tried one set and they worked well. At Sebring I tried another set and they were horrible, I tossed them after one session. So they may be hit or miss.

One note about wheel bearings. I lost mine at Daytona last year and tried to use Rob Lay's spare. Problem is his did not have ABS sensors in them, so incompatible with my car unless I turned off the ABS. I ended up buying one of the FoCF truck at full retail. Do you know if your spare as the ABS sensor in it?

 

My wheel bearing assy is complete. I also have tasked Jim at Pocono to give me and idea of what he and Bill @ Speedworks usually carry.