355 Clutch | FerrariChat
Buy

355 Clutch

Discussion in 'Technical Q&A' started by Capt, Jul 10, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Capt

    Capt Karting

    Nov 9, 2003
    222
    North of Boston
    Full Name:
    Michael
    #1 Capt, Jul 10, 2005
    Folks, with the help of some local Fchatters we tackled the clutch and throwout bearing replacement on my '95 F355. Armed with a "How To" PDF from this board along with my Ferrari service manual we were able to successfully finish the job. One concern I did have though is my service manual didnt seem to cover the actual assembly of the seals inside the throwout bearing. To make matters worse the throwout bearing was of an updated design and was different than the one that came out. Fortunately we figured it out but I was wondering if anyone had the tech drawings that detail the assembly of this updated part?

    Thanks!
    Michael
     
  2. Michael1

    Michael1 Karting

    Jun 27, 2005
    60
    Newbury Park, CA
    #2 Michael1, Jul 11, 2005
    Not to hyjack the thread here, but where is the "How to" PDF?

    Michael
     
  3. Capt

    Capt Karting

    Nov 9, 2003
    222
    North of Boston
    Full Name:
    Michael
    #3 Capt, Jul 11, 2005
    You can find the "How To" pdfs here:
    http://ferrarichat.com/forum/showthread.php?t=27374

    keep in mind that its a great write up and it helped us tremendously with taking the car apart but it doesnt detail anything about the throwout bearing, hence my original question in this thread.

    -Michael
     

Share This Page