355 Cradle bolt sizes | FerrariChat
Buy

355 Cradle bolt sizes

Discussion in '348/355' started by Carmellini, Mar 1, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Carmellini

    Carmellini Formula 3

    Jul 16, 2019
    1,008
    #1 Carmellini, Mar 1, 2020
    Helping a friend who lost all the hardware for the engine cradle. The engine is separated from the trans; we simply want to get the cradle back is place so the car can be rolled about. Later we will obtain proper and correct hardware. we just need some temporary fasteners from the hardware store

    Can anyone give me sizes in length, pitch, and diameter for the 18 or 20 ? fasteners? Thanks
     
  2. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,624
    San Carlos, CA
    Full Name:
    Mitchell Le
    #2 yelcab, Mar 1, 2020
    twelve of 12mm x 1.25mm x 35mm long
    Four 14mm x 1.50mm x 70mm long and four matching nuts
    Four 10mm x 1.25mm x 60 mm long (that length is a guess and you don't need those four anyway just to push it around)
     
    phrogs, kenneyd and Qavion like this.
  3. Carmellini

    Carmellini Formula 3

    Jul 16, 2019
    1,008
    #3 Carmellini, Mar 1, 2020
    HUGE help! thank you very much!
     

Share This Page