355 F1 self learning procedure | FerrariChat

355 F1 self learning procedure

Discussion in '348/355' started by yelcab, Jan 24, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. yelcab

    yelcab F1 World Champ Consultant

    Joined:
    Nov 29, 2001
    Messages:
    13,619
    Location:
    San Carlos, CA
    Full Name:
    Mitchell Le
    When you do a self learning procedure on a 355 F1 system, what parameters are learnt by the TCU? Is clutch wear part of the self-learning process?
     
    yelcab, Jan 24, 2021
    #1
  2. taz355

    taz355 F1 Veteran Owner Silver Subscribed

    Joined:
    Feb 18, 2008
    Messages:
    6,016
    Location:
    Indio Ca/ Alberta
    Full Name:
    Grant
    No it’s not Mitchell
    I’m no expert but from my Leonardo it’s just a number but really does not do anything but give you an idea of how much wear is left if it set correctly

    if your worried about the clutch replacement don’t be. As long as the clutch is bled and installed with the correct components and clearances it will work fine.
     
    taz355, Jan 24, 2021
    #2
  3. taz355

    taz355 F1 Veteran Owner Silver Subscribed

    Joined:
    Feb 18, 2008
    Messages:
    6,016
    Location:
    Indio Ca/ Alberta
    Full Name:
    Grant
    I can send you the section on the self cal but you likely have it
     
    taz355, Jan 24, 2021
    #3

Share This Page