355 Offset and aftermarket wheel fitment question | FerrariChat

355 Offset and aftermarket wheel fitment question

Discussion in '348/355' started by kimoSabe, Jun 22, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kimoSabe

    kimoSabe Karting

    Dec 7, 2003
    191
    No CA
    Full Name:
    Ray C.
    Did a search with no luck. I'm looking at a set of 19s with the following specs-245/35 ZR 19, 19 X 8.5 with 49mm offsets front and 275 30 zr19, 19x10 with 58mm offset rear. Will these fit a 355 with or w/o spacers? Also , what is the offset for the OEM wheels? Thanks for any information.
     
  2. MManzonelli

    MManzonelli Karting

    Nov 4, 2003
    82
    Columbia, IL
    Full Name:
    Mark Manzonelli
    The offsets for the stock wheels should be inside the wheel. Remove the wheel at it will say.

    If my memory serves me right, I believe the wheel information for a stock 355 is as follows:

    Wheels - Made by Speedline
    Front 8" Width Offset 60mm
    Rear 10" Width Offset 80 mm
     
  3. LetsJet

    LetsJet F1 Veteran
    Owner

    May 24, 2004
    9,334
    DC/LA/Paris/Haleiwa
    Full Name:
    Mr.
    355

    Front : 7.5" 46

    Rear : 10" 78

    Is the info I have
     
  4. kimoSabe

    kimoSabe Karting

    Dec 7, 2003
    191
    No CA
    Full Name:
    Ray C.
    I'm thinking the offset would be fine until I noticed that the bolt pattern is not correct (for Porsche). Thanks for the info anyway.
     
  5. fmomen

    fmomen Karting

    Oct 4, 2004
    239
    india
    Full Name:
    faisal
    245s in front might be a little to wide. Rear 295s is ok also.
     

Share This Page