355 right turn signal

You say you cleaned the relay, was it the turn signal relay ?. When I had this problem it turned out to be the hazard relay (ages over time) , some of the solder joints were dry. The dry
solder joints were re-soldered and the right turn signal worked again . I think the electrical signal goes through the hazard relay first , then onto the turn signal relay and then to the turn signal light. Ferrari changed this system in 1996 - 1997 , different relay numbers etc.

 

I thought Ferrari of Tampa was going to fix this problem per purchase agreement?
Docf

 

i also think it's the hazard relay.

 

where is that hazard relay located? I have the same annoying issue & have spent $$$ on this issue already.

 

first: sorry for my english but i try to explain the best i can.

i called it the hazzrd relay but i mean the hazard switch.
when your left or right signal does not work try to push a little on the hazzard switch,yoy see then that everything works again. inside the switch the contacts are not clean.you can try to clean the contacts or change the switch.
filippo, italy(ferrari 456GT)

 

My Hazard switch is not working well either. So I took it out & now the right signal works every time. Also I noticed on the back of all my switches is FORD stamped! Some of the stamps have been scratched out to hide their identity. I guess they forgot to deface a few on my car.