355 Specs-NEED HELP- PLEASE !!! | FerrariChat

355 Specs-NEED HELP- PLEASE !!!

Discussion in '348/355' started by CarCrazy, Apr 11, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. CarCrazy

    CarCrazy Karting

    Oct 2, 2004
    104
    Douglassville, PA
    Full Name:
    Bob
    Had alittle off road encounter, not real bad but don't want to take any chances. Need to see if anyone can help me get center line dimensions from front to rear wheels ETC, ETC. Not sure what technical terms I should be using but need to check alignment, track, overall specs to see if car is "square" on all four corners, etc. Have a 99 355 GTS F1. Hope that someone understands what I am asking for --- Thanks in advance.
     
  2. tonyc

    tonyc Formula 3

    Oct 19, 2003
    1,663
    Monterey, CA
    Full Name:
    Tony C
    Hi CarCrazy,
    Sorry to read about your mishap.
    Do not risk making things worse. See if you can get a ferrari mechanic to look at the car without moving it, short of that, call a flat bed and have it taken to a trusted shop to have it looked at. Good shops can use lasers to check the frame and the alignment. Good luck! --tony
     
  3. Steve R

    Steve R F1 Rookie
    BANNED

    Sep 15, 2004
    3,018
    MeSoNeedy, CA
    Full Name:
    TorQ Master
    Bummer

    It's a tough car, I bet it's fine....but I concur with Tony, you'll have to have a body shop throw it on their rack and use the computer/laser to determine if you racked your prize.

    If it's tweaked, just do what's commonly done: put it up on ebay at a suspiciously low price and insist that it's one of the cleanest cars in the state!
     

Share This Page