355 Spider removal of runners from seats | FerrariChat
Buy

355 Spider removal of runners from seats

Discussion in 'Technical Q&A' started by pourquoi_ne, Feb 6, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. pourquoi_ne

    pourquoi_ne Karting

    Mar 16, 2006
    224
    England
    Full Name:
    John
    #1 pourquoi_ne, Feb 6, 2010
    I need to remove the runners from the seats and I am sure how to do this. I have removed the seats from the car by moving them fully back, undoing the two bolts then moving them forward and undoing the rear bolts. Finally, I turned off the ignition, unplugged the connectors and removed the seats. Problem now is I cant access all six of the bolts that hold the runners to the seats without operating the motors.

    Any help would be appreciated!
     
  2. sambomydog

    sambomydog Guest

    May 23, 2009
    1,380
    #2 sambomydog, Feb 6, 2010
    Last edited: Feb 6, 2010
    God i cant remember exactly what i did. But i am sure once i removed my seats from the floor. I tilted them and connected the electrical connector back up so i could operate the seats to get access to the heads.
    Its been a few years.
     
  3. pourquoi_ne

    pourquoi_ne Karting

    Mar 16, 2006
    224
    England
    Full Name:
    John
    #3 pourquoi_ne, Feb 6, 2010
    Thanks! I wondered if that may be the way. I had hoped I could split the two items "on the bench" so to speak!
     
  4. sambomydog

    sambomydog Guest

    May 23, 2009
    1,380
    #4 sambomydog, Feb 6, 2010
    Maybe you can if you hook up to a battery.
     
  5. pourquoi_ne

    pourquoi_ne Karting

    Mar 16, 2006
    224
    England
    Full Name:
    John
    #5 pourquoi_ne, Feb 8, 2010
    Thats exactly what I did and worked a treat - thanks for your help!
     
  6. alfonso

    alfonso Rookie

    Mar 21, 2004
    19
    #6 alfonso, Feb 8, 2010
    just use a 12 volt battery with a couple of test wires.
     

Share This Page