My 355 won't start I hear a clicking sound from the starter engine but it does not turn I removed the starter and installed the repair kit I bought from ebay Also disassembled and cleaned the whole thing It looks OK and the brushes are fine But it remains dead I measured the resistance of the coils but get very small readings Any one know the values?? Thanks for helping Frank
Step 1. Load test battery. Step 2. Check for correct voltage at starter and confirm ground cables in good condition. Step 3. Remove starter and bench test.
Had the starter bench tested and it was OK Cleaned the connections of the ground cables The battery voltage was too low because the charger not functioning properly Thanks for helping me out
Some pics of the works Also found the 2 tubes to the coolingreservoir were bad Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Starter after cleaning including instalation of the solenoid kit of repairkitsUK Image Unavailable, Please Login View attachment 4254223
