355 steering rack rubber boot | FerrariChat
Buy

355 steering rack rubber boot

Discussion in 'Technical Q&A' started by k17har, May 5, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. k17har

    k17har Karting

    Sep 3, 2009
    144
    london, uk
    Full Name:
    kayer
    #1 k17har, May 5, 2011
    Last edited by a moderator: Sep 7, 2017
    hi all, I am planning to change both of the rubber boot on my 1995 LHD 355 spider, and just wanted to know if its a DIY process or just give it to the specialist.the driver side rubber boot is damaged and leaking grease, so anything else i need to change while this work is being done. any advice or link is much appriciated. thanks in advance :)
    Image Unavailable, Please Login
     
  2. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,228
    Mount Isa, Australia
    Full Name:
    Pap
    #2 PAP 348, May 5, 2011
    It is an easy job mate, if you're handy on tools. :):)

    Just need to remove the outer tie-rod ends, count the number of threads on the lock nut and then slip the old boot off and new boot on. :):)

    Should take around an hr per side for a complete novice id say. :):)
     

Share This Page