355 switch removal? | FerrariChat
Buy

355 switch removal?

Discussion in '348/355' started by Jeff348, Apr 10, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Jeff348

    Jeff348 Formula Junior

    Aug 2, 2005
    607
    S.I.New York
    Full Name:
    jeff spezzano
    #1 Jeff348, Apr 10, 2011
    Hey guys I did a search and can't seem to find a thread on how to remove the seat and top switches in the center console. I need to remove them to send to Robby. Thanks for your help.
     
  2. Gary Logan

    Gary Logan Karting

    Dec 19, 2009
    54
    West Vancouver, BC
    Full Name:
    Gary Logan
    #2 Gary Logan, Apr 11, 2011
    Jeff: There are four small plastic tabs that hold the bezel in place, two on top and two on the bottom. They are about one inch in from the edge of the bezel. You need to carefully pry the bezel out by gently pushing in the tabs to free one side and then release the bezel. The tabs break easily. As far as treating the plastic piece, you may find it cheaper to buy a new bezel, part number 64627100.
     

Share This Page