355 unidentified Wire

I have a 355 which has had a small wiring fire in the loom underneath the throttle linkage, I have removed the expansion bottle and throttle assembly and found the wiring to the temperature sensors etc had burned away, I have cut the wires back to where they were good and replaced them all with like amperage wires soldered in and sealed with heat shrink, But my problem is that this section of the loom going over the top of the engine contains 6 wires and it supplies a temperature sensor which has 2 and the remaining loom disappears down the front of the engine containing only 3 wires so there's only 5 wires to connect to...
The remaining wire is Green with a Black tracer and I am assuming it must have joined one of the others before the fire.
The wiring diagram is unclear as it doesn't show the proximity of joints in the wiring...

Any help would be greatly appreciated.

Regards Roy