355 Wheels on a 348 | FerrariChat
Buy

355 Wheels on a 348

Discussion in '348/355' started by 355dreamer, Apr 13, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 355dreamer

    355dreamer F1 World Champ
    Owner

    Apr 3, 2006
    10,476
    DC Metro
    Full Name:
    L.C.
    #1 355dreamer, Apr 13, 2009
    Last edited by a moderator: Apr 13, 2009
    So I know it can easily be done, but I am getting a lot of questions about my set of 355s wheels for sale and what is required to mount them to a 348. Can someone who has done it please let me know what is necessary? My ad includes 355 wheel bolts, will these work for a 348? Are wheel spacers required?
    Thanks
    http://www.ferrarichat.com/forum/vbclassified.php?do=ad&id=864
     
  2. potxoli

    potxoli Formula 3

    Mar 22, 2007
    1,716
    Washington DC
    Full Name:
    Eric B.
    #2 potxoli, Apr 13, 2009
    you definitely need spacers for the back. I run 20mm ones, but I think most people run 15mm. You also can't re-use the stock 348 bolts in the back, you need longer ones. Ricambi sells a spacers + bolts package for this. Best bet is for whoever buys the wheels to talk to daniel to get hooked up.
     
  3. 355dreamer

    355dreamer F1 World Champ
    Owner

    Apr 3, 2006
    10,476
    DC Metro
    Full Name:
    L.C.
    #3 355dreamer, Apr 13, 2009
    Thanks Eric. Are the stock 355 wheel bolts longer than 348 bolts?
     
  4. VTChris

    VTChris F1 World Champ

    Aug 21, 2005
    13,259
    #4 VTChris, Apr 13, 2009
    Ping Brent lachelt

    I think he has changed wheels a few hundred times :D
     
  5. potxoli

    potxoli Formula 3

    Mar 22, 2007
    1,716
    Washington DC
    Full Name:
    Eric B.
    #5 potxoli, Apr 13, 2009
    I'm pretty sure they are, but this might depend on which 348 we are talking about. Mine is a 1990. Later 348s like spiders or SS had wheels with more hub material to make a wider track, so those cars might have longer bolts. again, the permutations are complex enough that as the seller, I'd garantee the wheels fit with spacers, but leave it up to the buyer to figure it all out
     
  6. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,234
    Mount Isa, Australia
    Full Name:
    Pap
    #6 PAP 348, Apr 13, 2009
    Fixed for you mate! ;);)
     
  7. Reddesire

    Reddesire Formula Junior

    May 7, 2008
    388
    Melbourne, Australia
    Full Name:
    Andrew Gaal
    #7 Reddesire, Jun 2, 2009
    I'm lookin to put rear wheel spacers on my 92 348ts and PAP has recommended 15mm given I have 355 wheels. Would you have a pic of yours with the 20mm spacers. Would lik to see just how far out they come.

    Regs from Oz
    Reddesire
     
  8. MBFerrari

    MBFerrari F1 Veteran

    Jul 2, 2008
    6,057
    NoVA
    Full Name:
    Matt B
    #8 MBFerrari, Jun 2, 2009
    The SS's require longer bolts for the rear wheels as I had to buy them from Daniel. I not only have a set of challenge wheels awaiting refinishing, but a set of 355 wheels around if anyone is looking for a set. Not dying to sell them, but if someone is really yearning for a set, drop me a PM.
    MB
     

Share This Page