360 adjustable suspension help | FerrariChat
Buy

360 adjustable suspension help

Discussion in 'Technical Q&A' started by Shughes, Oct 28, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Shughes

    Shughes Rookie

    Oct 28, 2012
    2
    #1 Shughes, Oct 28, 2012
    Was wondering if someone could help me with some advice. I'm looking to lower my 2000 model 360 and wondering what the best way is? I have ordered some H and R springs fro
    The states but someone told me that the 360 has adjustable suspension as standard? Is this true? Another suspension dealer said that the H and R springs may not make much difference in the ride height? Any suggestions
     
  2. greyboxer

    greyboxer F1 World Champ

    Dec 8, 2004
    12,703
    South East
    Full Name:
    Jimmie
    #2 greyboxer, Oct 28, 2012
  3. Mitch Alsup

    Mitch Alsup F1 Veteran

    Nov 4, 2003
    9,741
    #3 Mitch Alsup, Oct 28, 2012
    To adjust the ride height, get a spanner wrench, remove the tire, and turn the spanner counter clockwise. These cars have fully adjustible suspension (from the factory).

    When you are done, take it to a specialist to have the car corner weighted and then aligned (or just have him do it all).
     

Share This Page