360 Cam Drive Pulley | FerrariChat
Buy

360 Cam Drive Pulley

Discussion in '360/430' started by bcwawright, Nov 8, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. bcwawright

    bcwawright F1 Veteran

    Jul 8, 2006
    5,234
    Georgia
    Full Name:
    Bruce
    #1 bcwawright, Nov 8, 2010
    Last edited: Nov 8, 2010
    Got a couple of questions and a request:

    1. Is it..steel,alum. etc.

    2. Diameter and width?

    3. Pics of side, back and front.

    These are the ones at the cams and not the engine cover.

    TIA
     
  2. 900ssDuke

    900ssDuke Karting

    Sep 12, 2007
    214
    UK
    #2 900ssDuke, Nov 9, 2010
    Last edited by a moderator: Sep 7, 2017
    Fraid I cant go in there at the moment and check for you. Can you identify which bit you require measurements for from the picture?
    Image Unavailable, Please Login
     
  3. bcwawright

    bcwawright F1 Veteran

    Jul 8, 2006
    5,234
    Georgia
    Full Name:
    Bruce
    #3 bcwawright, Nov 9, 2010
    Last edited by a moderator: Sep 7, 2017
    Thank you for taking the time to respond.

    I have circled in black the upper cam drive gear...this is what I would like measurements on when you get a chance.

    Again thanks..

    You can take a magnet and see if it sticks....these are either steel or aluminum.
    Image Unavailable, Please Login
     
  4. 900ssDuke

    900ssDuke Karting

    Sep 12, 2007
    214
    UK
    #4 900ssDuke, Nov 10, 2010
    Thanks for the clarification. Perhaps someone else that is in there could get the measurements.
     

Share This Page