360 - Caution buying Launch x431 Pro or updating software to V11.45

Short story: x431 Pro 3s+ software V11.45 wont read TCU or left engine bank, Launch tech support says they don't support the modules for them even though their software says they do.

Long story: I purchased the tablet last year and am still in my initial year of support and updates. Launch x431 Pro 3s+ V5. System now say V7 so I assume that was part of the software update.

It worked on my 2000 360 Spider with the software version V11.35.

The system prompted me to update software to version to V11.45 and like a dummy I did. It no longer will read the Airbag module (not currently an issue for me), the left bank Motronic Bosch EMS (ECU), or any of the AT modules for the TCU.

It has intermittently allowed access to the TCU through the various AT# modules but once in the access does not persist and it will not allow any of the functions such as clutch wear reading or self learn.

I have tried the Firmware fix but it does not resolve the problem.

I have spoken with their technical support and their response is that they don't support those modules. The documentation for the system says it supports all of the years and TCU (AT) modules. The previous version supported the modules. They wont backdate the software or make any attempts to resolve the issue.... Buyers beware and owners DO NOT UPDATE!

If any other users are having success with the new software I would love to hear from you.