360 Challenge - lug nut torque specification | FerrariChat

360 Challenge - lug nut torque specification

Discussion in 'Challenge/GT Cars/Track' started by rmarchjr, Sep 10, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. rmarchjr

    rmarchjr Formula Junior

    Joined:
    May 21, 2012
    Messages:
    586
    Location:
    North east, USA
    Hello all,

    Does anyone know the factory recomended torque spec for the lugs on the 360 challenge?

    I have a few that are going bad - $35 each Recambi(Hill Eng) or $91each Ferrari. The Studs are titanium but the lugs are aluminum.

    Generally aluminum lugs goto about 80 ft/lbs, but I would like to do whatever Ferrari recomends.

    Thanks
     
    rmarchjr, Sep 10, 2014
    #1
  2. NbyNW

    NbyNW F1 Rookie Silver Subscribed

    Joined:
    Feb 3, 2007
    Messages:
    4,309
    Location:
    South Dakota / Maryland
    In my notes I have two numbers from two respected people: 75 and 80. I use 77 and check after every session.
     
    NbyNW, Sep 14, 2014
    #2
  3. rmarchjr

    rmarchjr Formula Junior

    Joined:
    May 21, 2012
    Messages:
    586
    Location:
    North east, USA
    Thank you, I will do the same. I was using 90 and think that damaged the nuts.
     
    rmarchjr, Sep 15, 2014
    #3

Share This Page