360 conversion

This is some of the stuff that was deleted from the 360 evap secondary air system windshield wipers motor and arms and water bottle motor remove dot front and rear bumpers and replace new factory oem euro spec CS bumpers and side skirts all brand new from Ferrari . power windows motors glass this why it weights less that a standard CS car remove the huge stock battery tray and replace small light aluminum race tray and removed air bags and seat belts replace factory four point harness I like better you strap in tight you are not going any where with roll bar , if any one ever wants just plug it all back up very ease ..

 

this what it looks like now with all that bull **** gone LOL !! Image Unavailable, Please Login

 

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

the stuff above is the Challenge set hell of allot less and simple and lighter

 

My 360 CS conversion won the Pontre Vedra Auto Show 2018, the first car show I have ever gone to . I did not want to go but a good friend talk me into to going DAMN it was hot https://www.facebook.com/sjcchamber/photos/a.10155519150510957/10155519161685957/?type=3&theater

 

Thanks FossilFuel I was not happy it was hotter than HELL. I was ready to get the HELL out of there LOL

 

The parts are in storage I have been working have not had time yet to take pics, Tuesday for sure the parts are barley used and good condition I just found all genuine Ferrari parts the air box covers where used for about 500 miles and the exhaust .. so we are not wasting time if they are in good condition for both 2500.00 if not no big deal . so if that is do able let me know text me or pm thanks

 

Here are all the nuts bolts screws fasteners rubber pieces claps and other stuff that was replace new I know crazy right ?!?! LOL OSD CAN BE HELL
Image Unavailable, Please Login Image Unavailable, Please Login

 

Getting ready to install CS anti roll bar and titanium springs and rear CS shocks , one thing about running CB ceramic brakes the suspension stuff stays clean this is after driving 1125 miles still clean . Cast iron rotors makes dust that goes ever where rims are still clean . Notice that aluminum guide pin ? it is from Porsche very handy wend removing your wheels keeps from marking up the inside your rims and a hell of allot easy to put them back on
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Image Unavailable, Please Login

 

I have heard allot talk about Scrubbing Bubbles spray for cleaning engines , I found it works even better on wheels and tires and your suspension it cleans your tires so well you do not have to put any tire dressing, I pull wheels and tires off and spray the whole tire and rim down .. I found that Kaboom shower heavy duty spray works fanatic has Oxy clean. Go to HomeDepot and buy a garden sprayer one for Kaboom and one for distilled water about 14.00 a piece, with the garden sprayer you can get to all the hard places to reach . Rinse with Distilled water you never have to dry down there is no water spots to worry about .. Just to show how good Kaboom works I took my ION air filter it has stainless steel grids almost impossible to clean sprayed Kaboom clean 100 percent in just two minutes, you can see it dissolves very well
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

I clean behind the carbon fiber engine panels with Kaboom shower cleaner using a garden sprayer to get all the hard to reach places and distilled water to rinse with DAMN it is clean !! here is a link of what I have been using . I removed my fuel roll over valve hoping to prevent gas pump from flipping off all time. Why because wend I pulled it off and blew through it was sticking . I guess I ill find out next I fill up at the pump https://www.target.com/p/kaboom-with-oxiclean-shower-tub-tile-cleaner-32-oz/-/A-12856585
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Wend I thought everything was clean wrong ! Swiffer duster gets to all places you can not reach fanatic to use, just make sure you zip tie it so it does not slip off
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Old dash cluster and new CS cluster shows Race Mode not sport
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Thanks RedNeck I wished I had taken pictures of all the stuff that was removed and weight it . I did take a video of some of it and posted it on YouTube ttps://www.youtube.com/watch?v=RCi9TJaKvEI

 

First scale picture is my good friend Mikes CS he has own it since 2008 and it has less than 10,000 miles. He weight his for me so we could see weather mine was lighter. Steve Mase at Mase Engineer weight mine second picture was mine 360 conversion mine was less . I steel have allot more weight too shed, the CS trays weight 50 percent less than my stock trays, still have to install my titanium springs and the two rear shocks. F1 transition cap machine it down hopefully shed another 75 pounds . Oh yea and I need to go on a diet LOL
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Mike CS 2854 and mine was 2770 84 less pounds

 

Yes Mikes CS is stock only thing not stock is his exhaust he is using Timate titanium , he said he had about 12 gallons of fuel