News

360 conversion

Discussion in '360/430' started by RANDY6005, May 19, 2018.

  1. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
    Hours of cleaning and re-coating
     
    mwstewart likes this.
  2. To remove this ad click here.

  3. MCASEY

    MCASEY Rookie

    Apr 1, 2015
    42
    Sydney Australia
    Thanks mate, I appreciate any help you can give, I am based in Oz so, less complicated if we just make a drawing and I have all the tooling in my workshop. Thanks again, and good luck with the project.
     
    RANDY6005 likes this.
  4. Alleykat

    Alleykat Karting

    Apr 2, 2009
    142
    TX
    Full Name:
    Alex
    Amazing transformation Randy.
     
    RANDY6005 and 02360spider like this.
  5. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
    NAPAs Aluminum Brightener works fantastic !! Makes the aluminum look brand new again .
     
  6. To remove this ad click here.

  7. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
    Used a high gloss clear on the control arms stop corrosion and makes it easier to clean later on next steering hub.
     
    Performify and Mel Spillman like this.
  8. To remove this ad click here.

  9. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
    replaced shock bushing and front anti roll bar bushings , replacing all the left hand front corner with Ti fasteners should be here Monday . Ti fasteners for the carbon fiber door panels thinking theses will really look Bad Ass can not wait to see them installed !!
     
  10. duck.co.za

    duck.co.za Formula Junior

    Jan 9, 2007
    813
    Cape Town South Afri
    Full Name:
    Dave
    Looking awesome Randy
     
    RANDY6005 likes this.
  11. Freddan

    Freddan Formula 3
    Rossa Subscribed Silver Subscribed

    Sep 16, 2012
    1,370
    Vansbro (Sweden)
    Full Name:
    Fredrik
    RANDY6005 likes this.
  12. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
  13. timwu12

    timwu12 Formula Junior

    Oct 31, 2014
    692
    Houston, TX
    nice work, Randy!

    new fasteners really look a lot better than the old ones
     
    RANDY6005 likes this.
  14. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
  15. Ferrari Fix

    Ferrari Fix Rookie

    Mar 13, 2018
    7
    Pittsburgh, PA USA
    Full Name:
    Matt D
    Take care of the ounces and the pounds will take care of themselves! Great job!
     
    RANDY6005 likes this.
  16. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
    There's sixteen 4mm thick by 25mm OSD washers spacers for the upper control arms front and back replacing with Ti . The large flange hex head with holes are only made in 6mm . I want to use these for engine bay carbon fiber panels but you need 5mm ones . You can have some custom made it would very expensive unless order in a big bulk like couple hundred at a time bring the cost down maybe 7.00 a piece .
     
  17. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
    First pic is original bumper US DOT approved second my new CS Euro style rear bumper around 20 pounds lighter !!
     
  18. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
    Front spring for standard 360 and Ti for CS spring for front .
     
  19. RANDY6005

    RANDY6005 Formula 3
    Rossa Subscribed

    Jan 9, 2017
    1,757
    Jacksonville
    Full Name:
    RANDY
    blocks out all that sand and gravel , wend I removed old side skirts it was full of sand and gravel...
     

Share This Page