360 conversion | Page 31 | FerrariChat

360 conversion

Discussion in '360/430' started by RANDY6005, May 19, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
  2. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    Thinking all done Finley all in weigh 2620 pounds ? maybe less ?
     
  3. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    Maybe the lightest 360 on any USA street or HWY ?
     
  4. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    above about being the lightest would not have typed that, but a bottle or two of wine my lips loosen up LOL . I sure there's other 360,s just as light or maybe lighter .
     
    brogenville likes this.
  5. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    Challenge flamblocs are two pounds lighter than standard 360 flamblocs per corner, 8 pounds in total. Looking forward to weight it again last weight in was 2770 pounds with all stock suspension and fasteners.
    Image Unavailable, Please Login
     
    Performify and 02360spider like this.
  6. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
  7. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    mwstewart and remfrs like this.
  8. DonJuan348

    DonJuan348 F1 Rookie
    Owner

    Aug 5, 2008
    4,441
    Taxing Jersey
    Can you recommend reasonable prices coilover set?
     
  9. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    If I where to go aftermarket I would buy Ohlins coil overs don't know if they have a kit for a 360 430 maybe Google it .
     
  10. DonJuan348

    DonJuan348 F1 Rookie
    Owner

    Aug 5, 2008
    4,441
    Taxing Jersey
    Trust I have searched Besides KW and Moton I haven’t found anything
     
  11. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    Are you just looking to upgrade your suspension ?
     
  12. DonJuan348

    DonJuan348 F1 Rookie
    Owner

    Aug 5, 2008
    4,441
    Taxing Jersey
    No just replace factory and eliminate electronic suspension issues
     
  13. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    Even new old stock OEM control arms have some corrosion and are discolored after years on a shelf. Last set before installing I used NAPA Aluminum Brightener made them look like they were just made.
    Ended up remover the entire suspension back off, pulling springs off the shocks removing upper shock bushings and lower and all the control arms upper and lower steering axel hubs clean with NAPA Aluminum Brighter.

    Took less than one hour not bad considering not am mechanic I work in finance
     
  14. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
  15. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,730
    Dartmouth
    Full Name:
    Richard oliveira
    Those calipers I have been on the hunt for them at a cheap price suck there so expensive.

    Sent from my SM-N975U using Tapatalk
     
  16. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    Bought the axel hub above pic online off a burnt 3000 mile 2002 360 spider shipped two hundred Dollars clean up like new, also bought front upper and lower control arms two hundred..
    Hell of a good deal for spares parts !!
     
  17. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
  18. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
  19. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    Image Unavailable, Please Login

    Ferrari 430 360 Front Lower Left Wishbone Control Arm Used P/N 192492
    Add note- Ferrari 430 360 Front Lower Left Wishbone Control Arm Used P/N 192492
    ITEM PRICE:
    US $200.00 New over 900 dollars main thing to watch are burnt cars not wreck you do not want bent control arm on your 360 430
     
  20. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    Image Unavailable, Please Login

    Rear Upper Control Arm & Ball Joint & Bushing 200946 OEM Ferrari 360 430 F430
    Quantity: 4
    Add note- Rear Upper Control Arm & Ball Joint & Bushing 200946 OEM Ferrari 360 430 F430
    ITEM PRICE:
    US $800.00

    That is two hundred per control arm ,the Challenge bushings alone 300.00 per bushing for total of eight.. 300.00 x 8 = 2400.00 they new OEM old stock.
    Rear new upper control arms 425.00 per arm 4X 425= 1700.00 4100.00 cost me 800.00 Hell of a good deal again !!!
     
  21. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,270
    Jacksonville
    Full Name:
    RANDY
    Image Unavailable, Please Login

    New Rear Right Lower Control Arm 200941 199634 Ferrari 360 430
    Add note- New Rear Right Lower Control Arm 200941 199634 Ferrari 360 430
    ITEM PRICE:
    US $325.00 Another great buy 2006 430 Challenge rear control arm with Challenge bushings ball joint and shock bolt .
    Shock 170.34 control arm 452.00 two Challenge bushings 600.00 1222.34


    Part No: 177664
    Replaced By 204974(In Stock)

    New - in stockUS$170.34
     
    mwstewart likes this.
  22. DonJuan348

    DonJuan348 F1 Rookie
    Owner

    Aug 5, 2008
    4,441
    Taxing Jersey
    Randy

    what’s good source for rear under tray?
     

Share This Page