Hello Hope someone can assist.. Looking for TCU flash options for a 360. I've messaged Eric but doesn't seem to be around? Can anyone else perform this service (that is flash a TCU to CS spec) Thanks
Don't forget you'll also need to do the engine ecu's too (you can pm me if you need help on this and i can advise). Without both done you'll have issues with clutch slip and accelerated wear, particularly in normal mode. The car will never drive properly without both engine ecus and tcu if you fit a CS tcu and keep Modena setup. And whatever you do don't just plug in and expect it to work well, you'll need something like a Code Diag OBD tool to adjust the clutch PIS (point of initial slip) to account for clutch wear, i.e. to map the computers clutch engagement in the physical world to that of your actual vehicle. Good luck!
My car has a CS TCU fitted, but I don't think the ECUs have been touched. The car seems to flare up between 1 and 2 gear changes, and my local dealer reckons it's the clutch, but they couldn't measure it - it says it's 100% worn. Do you think it's the ECUs playing up here? Everything else seems great. I like how it changes gears much quicker than my other 360 without the CS TCU.
