How do you know went the clutch on the 360 F1 needs to be replaced?
Just like any other car, it will slip. Do not be sold a clutch based on an SD2 reading alone. It is not always an accurate portrayal of clutch condition.
Absolutely disregard SD2 clutch wear readings. The SD2 can be used to tell the Gearbox ECU (TCU) it has a new clutch fitted at any time. This will reset the wear reading to near zero. You can remove the inspection cover from underneath and physically look at and measure the clutch plate, but even then it is only an indication. And you need to remove the floor section to do this.
