360 F1 - Oil leakage with clutch SV triggered

One for the pro's I think......
Just a question from curiosity more than anything but what does the above parameter mean?

360 F1 - works perfectly and never seen a single F1 glitch in 4 years 10k miles.
The pump always runs more frequently that others report though....Say every two changes.
Pump was replaced two years ago as it was old. System fluid was replaced at the same time.
No leaks anywhere.

Reading through some SD printouts the above is circa 150 cc/min.

The oil leakage with SV not triggered parameter is reading 15cc/min.

The clutch was changed 5 years, 14k miles ago and the SD printouts from then show similar values.

I think the not triggered parameter says the valve block is holding pressure.

Is the clutch SV triggered measuring pressure drop when the F1 system is changing gear? I say pressure drop as the cc/min must be inferred from the accumulator volume/pipe flow rates as there is no flow meter in the system.

So my question is....is 150cc/min high?
Possible causes?



Sent from my iPhone using Tapatalk