360 fuel pump | FerrariChat
Buy

360 fuel pump

Discussion in 'Technical Q&A' started by Mel Spillman, May 18, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Mel Spillman

    Mel Spillman Formula Junior
    Silver Subscribed

    Nov 3, 2012
    712
    Sugar Land, Tx
    #1 Mel Spillman, May 18, 2025
    Looking for the correct Bosch fuel pump part numbers for a 360 SPIDER. Why are the part numbers different for a coupe and a spider?? Thanks
     
  2. EastMemphis

    EastMemphis Formula 3
    Owner Silver Subscribed

    May 25, 2019
    1,837
    Memphis, TN
    Full Name:
    John
    #2 EastMemphis, May 18, 2025
    Blame the Capote! There's less clearance over the fuel pumps in the Spider, hence, special pumps for the Spider.
     
    hessank and Qavion like this.
  3. Mel Spillman

    Mel Spillman Formula Junior
    Silver Subscribed

    Nov 3, 2012
    712
    Sugar Land, Tx
    #3 Mel Spillman, May 18, 2025
    That makes a lot of sense! Thank you
     
  4. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,444
    San Carlos, CA
    Full Name:
    Mitchell Le
    #4 yelcab, May 19, 2025
    Yet, it is much easier to change the fuel pump ... in a spider. One of the rare events for a spider.
     
    Mel Spillman and hessank like this.
  5. hessank

    hessank Formula 3
    Silver Subscribed

    Aug 8, 2005
    1,898
    Canada, Florida
    Full Name:
    Fred
    #5 hessank, May 19, 2025
    +360

    I agree. There's no issue with clearance if the correct pump is bought.
     
    Mel Spillman likes this.
  6. windsock

    windsock Formula 3
    Rossa Subscribed

    Nov 29, 2006
    1,136
    #6 windsock, May 19, 2025
    Providing it isn't a 1999 or early 2000 which requires the top removal for access.
     
    Mel Spillman likes this.
  7. Motob

    Motob Formula 3
    Professional Ferrari Technician

    Nov 11, 2003
    2,353
    Frederick, Maryland
    Full Name:
    Brian Brown
    #7 Motob, May 26, 2025 at 7:14 PM
    One of the big issues with 360 fuel pumps is that the top of the complete pump assembly was made from a white plastic that cracks at the fuel pressure regulator that is built into the top, causing fuel to leak out. The replacement pumps are made from a beige plastic that doesn't crack, or at least not yet. So it is best to replace the complete pump assembly with a new part.
     
    Mel Spillman likes this.

Share This Page