360 gated 6 conversion clutch master cylinder | FerrariChat
Buy

360 gated 6 conversion clutch master cylinder

Discussion in '360/430' started by Tbailey, Nov 29, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Tbailey

    Tbailey Rookie

    Sep 26, 2021
    31
    Scottsdale az
    Full Name:
    Todd bailey
    #1 Tbailey, Nov 29, 2021
    I’ve gotten all the parts to do the conversion on the F1 but I’m wondering if that clutch master cylinder is off of some other car does anyone know if there is an alfa or Fiat part that is the same as the 360 clutch master cylinder????

    It was not a carryover from the 355 I know that
     
  2. WillskiGT

    WillskiGT Formula Junior

    Aug 12, 2017
    444
    #2 WillskiGT, Nov 29, 2021
    Brembo C22 002

    Not in stock anywhere as best as I can see. Your best bet is the $300 Ferrari branded one on eBay
     
  3. modificator

    modificator Formula Junior
    Rossa Subscribed

    Apr 12, 2020
    439
    Florida
    Full Name:
    George
    #3 modificator, Nov 29, 2021
    The best bet is 0.625" Wilwood master cylinder, that's what I'm using. Available everywhere - $60-$80 depending on where you buy it from. You just need to either increase the firewall hole a bit or shave a bit from the cylinder as it is a couple of mm or so too large to go through the firewall hole.
     
    one4torque likes this.
  4. modificator

    modificator Formula Junior
    Rossa Subscribed

    Apr 12, 2020
    439
    Florida
    Full Name:
    George
    #4 modificator, Nov 29, 2021
    Or more accurately, "If you have access to a lathe, the best bet is 0.625" Wilwood master cylinder" :) as some machining of it is needed. Otherwise indeed a new Ferrari part would be the easiest way to go. I would not buy used, as they are probably ready for a rebuild by now.
     

Share This Page