360 Heat exchanger upgrade? | FerrariChat
Buy

360 Heat exchanger upgrade?

Discussion in '360/430' started by aventari, May 14, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. aventari

    aventari Karting

    Dec 9, 2010
    157
    San Diego
    #1 aventari, May 14, 2023
    I just got a 99 360 this week and reading about the heat exchanger problems has me worried. Has anyone replaced the stock heat exchanger with something like this?

    https://www.cantonracingproducts.com/canton-82-160-aluminum-tube-heat-exchanger-3-inch-diameter-6-inch-long/

    Image Unavailable, Please Login

    or maybe just a standard air/oil cooler like this?

    Image Unavailable, Please Login

    Obviously the water/oil cooler has the benefit of heating up the gearbox oil quicker, at the expense of more complicated plumbing.
     
  2. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,115
    Full Name:
    Josh @jtcarprojects
    #2 clean512, May 14, 2023
    I have all the parts ready to do the conversion to a setrab cooler. The fittings at the tranny were hard to figure out but got the bypass hose . Just need to mock up a spot on THE DRIVER side near the air tube .
     
    LorenzoR likes this.
  3. collegeboy

    collegeboy Formula 3

    Aug 25, 2007
    1,371
    Texas and Kaua’i
    Full Name:
    Mikey
    #3 collegeboy, May 14, 2023
    Super cool. Thinking of doing something like that. Might just replace the factory heat exchanger during this major service though and continue to do so at each major service until I possibly decide to do exactly what you are doing. Good luck with the conversion.

    Mike
     
  4. aventari

    aventari Karting

    Dec 9, 2010
    157
    San Diego
    #4 aventari, May 14, 2023
    Are you doing a standard air/oil seatrab?

    I assume your cooler is AN fittings, what adapters did you need for the trans lines?
     
  5. clean512

    clean512 Formula 3

    Feb 4, 2010
    2,115
    Full Name:
    Josh @jtcarprojects
    #5 clean512, May 14, 2023
    SoftwareDrone likes this.

Share This Page