360 help needed | FerrariChat

360 help needed

Discussion in 'Technical Q&A' started by Davidt, Mar 14, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Davidt

    Davidt Formula Junior

    Nov 18, 2003
    713
    Ontario, Canada
    Full Name:
    Dave T.
    Hoping someone can help. In the process of replacing the airbags in my 360. I’m getting an error code 08 Drivers side airbag 1 degree- stage short circuit. The airbags and the airbag module are new. Any ideas? Also, the oil pressure gauge is at full deflection. One would assume that the oil pressure sensor has crapped. When I disconnect the sensor the gauge still remains at full deflection. I am getting error code “18 Oil pressure sensor”. So now I’m not sure if it’s the sensor or the instrument cluster. Any input would be appreciated.
     
  2. FerrariDublin

    FerrariDublin F1 Rookie

    Jun 14, 2009
    3,454
    Dublin, Ireland
    Full Name:
    Greg
    #2 FerrariDublin, Mar 14, 2011
    Last edited: Mar 14, 2011
    Air bag error - just a thought but perhaps the error code still needs to be reset from whatever caused you to need to replace the air bag?

    Oil Pressure gauge - sounds like the gauge has travelled over with enough force to get snagged - try tapping the glass and see will it release and return to normal resting position? Sounds like the sensor has probably gone bad and sent the gauge the wrong message. Alternatively perhaps the the sensor and gauge are fine and the oil pressure relief valve has stuck.
     

Share This Page