360 instrument cluster

I have to remove the instrument cluster in my 2001 360. The steering wheel is in the way. How do I drop steering column down or pull it out. I am sending the cluster to FAI in Costa Messa for repair and I live in NJ. They said it was easy to drop the column. Any thoughts.

 

Nick- Here is how to do it. You could put on a yellow or red tach face while you are at it.

Taz
Terry Phillips

http://www.ferrarichat.com/forum/showthread.php?t=176480&highlight=yellow+tach+face

 

Here you go Nick
I just did mine 30 mins ago.....

You need to take the upper and lower steering wheel shroud off.

You will see a small (5/16" I think ) hex head machine screw on the Left Side of the colum.
Remove that and it will allow you to lower the wheel a little more.
3rd pic with yellow paint on it.

Make sure you put a rag over the top of the steering wheel column when your pulling out the cluster.

You can scratch it very easily.

Call me if you have any questions
330-232-5048

Chas
(see below)

http://www.ferrarichat.com/forum/showthread.php?t=176480&highlight=360+gauge

 

I have the F1 paddles. How do I take the plastic top and bottom parts of the steering column off to get started. I do not see any screws under there. The top pops off in the front. Does it pull out somehow??