News

360 oil change

Discussion in 'Technical Q&A' started by Gary(SF), Aug 20, 2004.

  1. Gary(SF)

    Gary(SF) F1 Rookie

    Oct 13, 2003
    3,637
    Los Altos Hills, CA
    Full Name:
    Gary B.
    For those of you who have done this yourself...if you drain from the two plugs and change the filter, how much oil should I pour in before starting and checking the level? I don't want to overfill and there must be some trapped in the lines and coolers, but I don't want to put in too little either. Capacity is 10 liters, so I was thinking start with 8, run the motor and check the level. Sound o.k.?

    Gary
     
  2. To remove this ad click here.

  3. Gary(SF)

    Gary(SF) F1 Rookie

    Oct 13, 2003
    3,637
    Los Altos Hills, CA
    Full Name:
    Gary B.
    I'll answer my own question, if anyone cares :)

    I drained and refilled with 8 liters, checked level, added another liter, checked again, added half a liter, drove for 1/2 hr, checked again, added another 1/2 liter, so it took the full 10 and is still about 2/3 way from bottom to top mark.

    Gary
     

Share This Page