360 Project | FerrariChat
Buy

360 Project

Discussion in 'New York Tri-State' started by TurboTommy, Oct 3, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 1 of 2
  1. TurboTommy

    TurboTommy Rookie

    Oct 3, 2004
    16
    #1 TurboTommy, Oct 3, 2004
    Hi everyone I'm new to this community but not as lucky to own one of the greatest cars. The reason for this post is that I'm doing my final project at NJIT and its on intake for a Ferrari 360 Modena. I need help getting dimensions of the rear hatch and the dimensions and the location with respect of the hatch of the air boxes.
    Please Help me
    Thanks Tom
     
  2. JC360

    JC360 F1 Rookie
    BANNED

    Nov 2, 2003
    3,067
    NYC...and soon WC 2
    Full Name:
    Jon C.
    #2 JC360, Oct 3, 2004

    stop by and see us at the time square shoot and americana show...
    all the 360s in the ec crew have air intake mods.
     
  3. Hubert888

    Hubert888 F1 Veteran
    BANNED

    May 14, 2003
    5,441
    Manhattan & LA
    Full Name:
    Hubert
    #3 Hubert888, Oct 3, 2004
    werd zen
     
  4. phantasms

    phantasms Formula Junior
    BANNED

    Dec 15, 2003
    311
    East Coast
    Full Name:
    Gene
    #4 phantasms, Oct 3, 2004
    ....360 intakes cast a lot to modify.... :D
     
  5. robiferretti

    robiferretti F1 Rookie

    Oct 31, 2003
    3,299
    NYC area
    Full Name:
    rob ferretti
    #5 robiferretti, Oct 4, 2004
    go to classic coach in elizabeth, maybe you can help design something for their racing team
     
  6. Black355

    Black355 F1 Veteran

    Feb 3, 2004
    5,255
    10036
    Full Name:
    Emil
    #6 Black355, Oct 4, 2004
    Maybe this guy could design something for Rene's car so the intakes remain attached to the manifolds!
     
  7. technik1

    technik1 Formula Junior

    Nov 26, 2003
    282
    NYC
    Full Name:
    Gus Technik
    #7 technik1, Oct 4, 2004
    Double werd, zen...
     
  8. TurboTommy

    TurboTommy Rookie

    Oct 3, 2004
    16
    #8 TurboTommy, Oct 4, 2004
    Yes everything will be mounted on the Hatch and the intakes are going to stay in place. The top draft intakes are going to be mounted of each sides of Hatch. The side vents will be taken out and My design intakes will be mounted in the factory mounts. The final product will be made out of carbonfiber. There is much more im have problems uploading the pictures.
    Please help me upload pics !!!
     
  9. Hubert888

    Hubert888 F1 Veteran
    BANNED

    May 14, 2003
    5,441
    Manhattan & LA
    Full Name:
    Hubert
    #9 Hubert888, Oct 4, 2004
    u have to be 'silver subscribed' or 'rossa subscribed' in order to upload pictures, meaning that u have to pay for a membership on fchat.

    go to pay to play plaYa.
    otherwise u can email the pics to anyone of us and we will gladly post them up for you. (asp924 at yahoo dot com, if u want to send them to me)
     
  10. TurboTommy

    TurboTommy Rookie

    Oct 3, 2004
    16
    #10 TurboTommy, Oct 4, 2004
    Pics sent to Hubert888
    thank you
     
  11. TurboTommy

    TurboTommy Rookie

    Oct 3, 2004
    16
    #11 TurboTommy, Oct 4, 2004
    can anyone else host the pics for me
    please
     
  12. chrlsstyles

    chrlsstyles Formula 3

    Jun 29, 2004
    1,154
    #12 chrlsstyles, Oct 4, 2004
    email me chrlsstyles at aol.com
     
  13. notoboy

    notoboy F1 Rookie

    Jul 8, 2003
    2,531
    NYC
    Full Name:
    David
    #13 notoboy, Oct 4, 2004
    OK already, where are the pics? I'm getting impatient...
     
  14. Hubert888

    Hubert888 F1 Veteran
    BANNED

    May 14, 2003
    5,441
    Manhattan & LA
    Full Name:
    Hubert
    #14 Hubert888, Oct 4, 2004
    Here are your pics:

    .
     
  15. TurboTommy

    TurboTommy Rookie

    Oct 3, 2004
    16
    #15 TurboTommy, Oct 4, 2004
    thanks hubert
    these are just drawn ones i have ones made on AutoCAD
    I know all of the dimensions are wrong but if one of u could help me out and give me exact measurements
    Thanks tom
     
  16. THonda

    THonda Formula Junior

    Jul 7, 2004
    724
    Long Island, NY
    Full Name:
    TH
    #16 THonda, Oct 5, 2004
    interesting, how does this intake take into account of rain? or that doesn't really matter right now :)
     
  17. W00dEar

    W00dEar F1 Rookie
    BANNED

    Feb 24, 2004
    3,592
    LI, NY
    Full Name:
    Chris
    #17 W00dEar, Oct 5, 2004
    wow ur up at 2am.
     
  18. Black355

    Black355 F1 Veteran

    Feb 3, 2004
    5,255
    10036
    Full Name:
    Emil
    #18 Black355, Oct 5, 2004
    The vents around the rear window are not the intakes for the engine.
     
  19. THonda

    THonda Formula Junior

    Jul 7, 2004
    724
    Long Island, NY
    Full Name:
    TH
    #19 THonda, Oct 5, 2004
    I think that's what his project is about, using those vents as a direct source for air.
     
  20. TurboTommy

    TurboTommy Rookie

    Oct 3, 2004
    16
    #20 TurboTommy, Oct 5, 2004
    OK the rain is not an issue as of right now, I'm going to use the stock drains on the sides of the engine.
    The side vents which are used right now to relase the heats that the engine produces underneath the glass are the ones im going to use.
    The design is going to be ram air and the vents are going to be taken out and im going to install my newly design intakes using the factory mounting points.
    The intakes will go up as the hatch goes up its going to be as one. Once u close the hatch the intakes will directly go on top of the airboxes. This will create ram air intake.
    Now could someone please help me and give me exact dimensions of the hatch, vents, air intake location with respect to the airboxes, and mounting points.
    I would really apreciate all of the help guys.
    Another thing if anyone would let me know where can i go and measure everything myself please let me know.
    Thank you for ur interests
     
  21. THonda

    THonda Formula Junior

    Jul 7, 2004
    724
    Long Island, NY
    Full Name:
    TH
    #21 THonda, Oct 5, 2004
    Hey man, not trying to knock your project, just want to make sure you don't get a "F".......how are those vents going to produce a "ram air intake" as air is not forced into it :)

    I am sure you already know that when i was asking about rain, i was thinking water in the intake....
     
  22. Hubert888

    Hubert888 F1 Veteran
    BANNED

    May 14, 2003
    5,441
    Manhattan & LA
    Full Name:
    Hubert
    #22 Hubert888, Oct 5, 2004
    werd zen.

    no F's here
     
  23. TurboTommy

    TurboTommy Rookie

    Oct 3, 2004
    16
    #23 TurboTommy, Oct 6, 2004
    The vents are above and side of the roof and quater pannel.
    Still deciding on the design but thats how the air will be drawn look t the first pic.
    Please help me with dimensions
     
  24. TurboTommy

    TurboTommy Rookie

    Oct 3, 2004
    16
    #24 TurboTommy, Oct 7, 2004
    So will anyone plese help me out with this ???
    I mean i know u are all busy but at least can some one point me in the right direction.
     
  25. TurboTommy

    TurboTommy Rookie

    Oct 3, 2004
    16
    #25 TurboTommy, Oct 10, 2004
    Can some one please help me ??????
    Im willing to pay whatever for help !!!
    At least please point me in the right direction !!!
    Thanks
     
Page 1 of 2

Share This Page