360 spider roof fault | FerrariChat

360 spider roof fault

Discussion in '360/430' started by slater687, Sep 3, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. slater687

    slater687 Rookie

    Sep 3, 2022
    4
    Full Name:
    james slater
    Hi, does anyone know where i can access a workshop manual that includes the roof workings? The rear roof cover has dropped / pulling to far down and wont let the roof complete its full cycle.
    thanks james
    Image Unavailable, Please Login
     
  2. slater687

    slater687 Rookie

    Sep 3, 2022
    4
    Full Name:
    james slater
  3. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    can you lift the engine hatch and snap some pics up inside there?
     
    slater687 likes this.
  4. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    looks like we have same color combo car...I was wandering what it looks like under the corner thats sagging. you may have to take that side engine panel off to look inside there. If you decide to take it off take pics
     
    slater687 likes this.
  5. modificator

    modificator Formula Junior
    Rossa Subscribed

    Apr 12, 2020
    438
    Florida
    Full Name:
    George
    PM me with your email and I'll send a file transfer to you
     
  6. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    James, under that corner that has dropped there are 2 bolts for adjustment. Take that side engine cover off and look up at them. They may have just come loose. Take pics if u can
     
  7. priericky128

    priericky128 Formula Junior
    Silver Subscribed

    Feb 11, 2021
    693
    St. Louis MO
    Full Name:
    Rick
    Curious what you find out. I have the same problem but not as bad as my roof cycles just fine. I’ve had the capote cover off and tried to align it but can’t get it totally right.
     
  8. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    Mine had the same issue. That corner had dropped down but mine wasn't as bad as slater687. I adjusted those. lots under that corner and I got it close
     
  9. priericky128

    priericky128 Formula Junior
    Silver Subscribed

    Feb 11, 2021
    693
    St. Louis MO
    Full Name:
    Rick
    Curious how you fixed it?
     
  10. LorenzoR

    LorenzoR F1 Rookie
    Rossa Subscribed

    Well mine wasn't as bad but what I did was to loosen both of the bolts underneath of that corner. The adjustment is under there. What worked for me was to adjust the one on the right 1st and then the 1 on the left which is towards that corner. Pics are worth 1000 words but im away from the car for now or I'd post pics. Now he could have a different situation because his looks worse so the 1st thing I would do is look up under there and see what's going on.
     
    Marcoboxer likes this.
  11. priericky128

    priericky128 Formula Junior
    Silver Subscribed

    Feb 11, 2021
    693
    St. Louis MO
    Full Name:
    Rick
    Okay thanks. Yeah I think I know what you’re talking about if memory serves it’s a flat triangular piece. I probably just didn’t stick with it long enough to make it right. I was going to maybe fab some shims too
     

Share This Page