I know, this has been a long time coming. I worked on this prototype all day today. It looks like I can barely wedge a JL Audio 8" subwoofer into an enclosure that completely clears the seats. No interference whatsoever. These will be more expensive but if you need every millimeter of seat space, this enclosure is for you. By the way, for those of you who are not aware of this, I have officially started a business and have become an official sponsor of FerrariChat. The name of the business is "Scuderia Audio". My banner will pop up at the top of the page from time to time. EDIT: I am also attaching a photo of the 360 coupe slim line enclosure so you can see what the finished product will look like. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Thanks Steve. Send me what color leather you want, what color stitching and the number of stitches per inch of your existing leather so we can match, to [email protected]. Can you give me a week? I have four orders in the queue and am working as fast as I can.
So, I am determined to figure this out. I may have to make some notches in the sides of the enclosure but I think it will still look good. Any 430 owners reading this, I could use a couple of measurements. I need to know the distance between the two inner seat adjustment knobs and distance between the two inner seat back flip up levers. I am having the hardest time getting my hands on a 430 these days. Any help would be appreciated. Image Unavailable, Please Login
Guys, I need a couple more 430 measurements as I need more than one data point. I need the distance between the firewall floor and the bottom of the rear glove box. I am getting everything from 7 3/4" to 9". I also need the distance from the firewall to the back of the center console. I am seeing 9 1/2" and 10". Ideally, I would get a measurement from a leather center console car and a carbon fiber center console car. Thank you.
I had to make some major adjustments to the prototype. Clearing those lower seat adjustment knobs took some major surgery. Just making notches to clear the knobs made it look stupid, but continuing the notch all the way down to the bottom was the ticket. Now the prototype clears the seats in any position. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Mike, I am locate in San Jose as well. Would you mind if I can pay you a visit to check out your shop? Please PM me when you become available. thanks