360 Spider Sway Bar Mount | FerrariChat
Buy

360 Spider Sway Bar Mount

Discussion in 'Technical Q&A' started by 355Aloha, Jul 17, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 355Aloha

    355Aloha Karting

    Feb 15, 2004
    120
    Honolulu Hawaii
    Full Name:
    John N
    #1 355Aloha, Jul 17, 2009
    360 sway bar mount comes lose after 3-5 miles regardless how tight I make it. It come lose and makes a big racket. Need Help
     
  2. rustybits

    rustybits F1 Rookie
    Professional Ferrari Technician

    Jan 28, 2007
    2,509
    Somewhere, anywhere
    Full Name:
    Eddie B
    #2 rustybits, Jul 17, 2009
    Are you talking about the bracket on the front, help in place with two 10 m.m bolts? If so, remove the bolts and thoroughly inspect the two threaded holes in the chassis. I've seen these overtightened before, which damages the thread. This results in the bolts working loose, there is quite a lot of load applied to that little bracket! You may have to have it drilled and some decent quality nut-inserts put there to cure it.
     

Share This Page