360 starwheels on a 355

Probably look like this.
Image Unavailable, Please Login

 

Oh, it's not mine. I just Googled it. I agree that it looks good, though.

 

Honestly, the 360 wheels just look good. Period. You could put them on just about anything and they would look nice.

 

Funny thing is I think they look better on the 348 and 355 then they do the 360.

If you're looking for a very cheap set that wouldn't set you back much to check out how the look PM me, I have several sets.

 

the 360 wheels do look good

 

I agee with this. It's always been my contention that a car with a lot of body lines/scoops/grilles/ etc look better with a simple wheel and a car with minimal lines/etc can use a more complicated wheel.

IMO a mesh wheel like a BBS on a 308/348 is far too busy. They (Ferrari) had it right the first time with 308's simple star wheel. By contrast the 360 with its smooth overall shape can easily handle a busy mesh wheel.

 

It's really a matter of taste. Personally I think the 360 wheels are the only thing that isn't nice about the 360.

 

Truth
Image Unavailable, Please Login

 

I'm planning to buy a set for my Honda Odyssey.

 

I don't think it has been mentioned yet, the fronts are a bolt on job but the rears need different wheel bolts and you have to get 20mm machined off the back of the hub or wheel will stick out of the wheel well. Any good machine shop can do that for you.

I'll do a search and see if I can find the pic I posted.

 

Here is mine, you also need 32mm wheel bolts, I found them from a German car parts place, Otis Inc. for allot less than Ferrari, same exact part from the same vendor.
Image Unavailable, Please Login

 

I have unmachined 360s on my 348 and do not consider them outside the fender. I don't know how different/similar the rear fender or track of the 355/348 are tho

 

Correct, the 348 had that spacer added later on and the 360 wheel on the 348 is like including the spacer and it all fits correctly. The 355 had that track width built in so running the 360 wheel stock is like putting a 20mm spacer in play and the wheel sticks out of the wheel well.

 

Here is my 348 with a set of chromed 360 wheels (LA Wheel & Tire - Jennifer).
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

go figure.
your wheels look great

 

oh ok....thats good to know.....need rear hubs machined on the 355.

 

the offsets look good with the 360 wheels on a 348.