Översätt text med kameran I have a 360 spider -02 and was thinking of changing my TCU the one that is in the car 193263. I got hold of 211023. When I change and turn on the ignition it warns of gearbox and N flashes in the display and beeps all the time. Someone who knows why.
You need a tool which you can input some parameters and do a re-learn on the new TCU Here are some steps Write down clutch position from new from old TCU and pis Disconnect battery Replace TCU Connect battery Reset clutch position new to sams value as you wrote down Perform actuator relearn Reset pis to 5 Reset clutch wear index Test a few gears with launch /think diag Start car Bring to temp Idle for 5 mins Press and hold brake in first for 5 mins Go for a ride Adjust pis when hot to grab at approx 950 rpm .
