360 Wheel sizing. 19" or 19" & 20"..? | FerrariChat

360 Wheel sizing. 19" or 19" & 20"..?

Discussion in '360/430' started by GI Jnr, Dec 9, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. GI Jnr

    GI Jnr Karting

    Feb 26, 2004
    93
    Bristol
    Full Name:
    Tuan Le
    FChatters from over the water, I need your help...

    Have pretty much decided on a set of IForged Seneka wheels for the 360, but have a question re sizing.

    I've two options: 19" all round, or 19" front and 20" in the back.

    My questions are with the larger rears; will they fit on with no mods to the arches and do they/will they foul the arches at all...?

    I also don't know whether I should be worried that the back will sit high compared to the front...

    Either way, I think it's going to look awesome! Have decided on black wheel centres with polished lip and will drop it slightly. The car's Rosso with a rear challenge grille, so the black will (should) compliment.

    Thanks for any help.

    Tuan
     
  2. RWDRIFTC2

    RWDRIFTC2 Rookie

    Oct 21, 2004
    12
    Tuan,
    You can run either the 19x9 and 19x13 setup or a 19x9 and 20x13 setup. Both setups will fit your car.
     
  3. plstc

    plstc Karting

    Nov 12, 2005
    54
    I ordered 20", 11" wide for my 360 spider.
    Is this too narrow, what are the pros and cons of going 12", or 13" wide?
    Wondering if I should change the order of the HRE841R
     
  4. mark360

    mark360 Rookie

    Nov 21, 2005
    15
    Daventry, UK
    Full Name:
    Mark Jarvis
    #4 mark360, Dec 19, 2005
    Last edited by a moderator: Sep 7, 2017
    tuan, this car is fitted with 20" rims all round and is lowered,

    it is owned by the owner of wheelmania you could try and contact him for more info
    Image Unavailable, Please Login
     
  5. Hubert888

    Hubert888 F1 Veteran
    BANNED

    May 14, 2003
    5,441
    Manhattan & LA
    Full Name:
    Hubert
    for optimum performance and handling,
    20's are not recommended for the 360M.

    if u tracking the car, i would stick with 19's

    i have HRE 841R's on my whip and sizes are:

    8.5" x 19's front
    11" x 19's rear



    i also have put on 20" Imola Mistral rims (9" in the front, 11" in the rear) and they fit FINE. and i had car lowered already when i got my HREs
     
  6. cig1

    cig1 F1 Rookie

    May 3, 2005
    2,914
    In front of you
    #6 cig1, Dec 19, 2005
    Last edited by a moderator: Sep 7, 2017
  7. VROOM!!!

    VROOM!!! Formula 3

    Feb 11, 2004
    2,495
    Los Angeles
    Full Name:
    Armen
    Sweet rims, man!
     
  8. yellow 355

    yellow 355 Formula Junior

    Mar 25, 2005
    503
    ocean city,nj
    Full Name:
    Ben Murphy
    Cig1 is your car dropped at all???? I will be doing 19s with same tires on OZ FORGED RIMS....I want that same lower look seems you need to drop it a little.Did the rims change your ride quality or handling????"
     
  9. cig1

    cig1 F1 Rookie

    May 3, 2005
    2,914
    In front of you
    I did lower the car a little ;) ... have had the tires rub the fender a couple of times when turning into a steep driveway. I plan to slightly roll the fenders and raise the front three complete turns which should amount to about .25"+(I think it may be a little too low) ... that will make a significant difference.

    The ride is the same as before although I know the shocks have probably reached their bump stops on a few dips at speed. Also, low-profile 19" tires don't exactly ride the same as OEM 18".

    You should check the offset on the OZ wheels against the spec for the Iforged, just for comparision.

    G
     

Share This Page