360 wheels spacers or no spacers 348 | FerrariChat

360 wheels spacers or no spacers 348

Discussion in '348/355' started by ERICZZ, Jun 26, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ERICZZ

    ERICZZ Karting

    Aug 26, 2005
    127
    New Hartford
    Full Name:
    ERIC Z
    Can anyone tell me if I need to use spacers or not . I also now have three sets of wheels and tires now . Chrome factory with p zero's less than 100 miles , factory silver with kumho's 1500 miles and the 360 wheels . I would sell either set of factory wheels . Car is a 1994 348 spider . I have 25mm on rear and 15mm on front . Just wondering if these should be used or not with the factory 360 wheels .
     
  2. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    You shouldn't need any spacers with the 360 rims.
     
  3. Michael Everson

    Michael Everson Karting

    Nov 5, 2005
    224
    Norton, MA USA Earth
    Full Name:
    Michael Everson
    I agree no spacers. My rear wheels stuck out too far with the spacers.
    Mike
     
  4. ERICZZ

    ERICZZ Karting

    Aug 26, 2005
    127
    New Hartford
    Full Name:
    ERIC Z
    Thanks Mike I bought your wheels !
     
  5. elgin328

    elgin328 Formula 3

    Apr 11, 2004
    1,034
    near Atlanta
    Full Name:
    Mark
    you will need a shorter wheel bolt for the rear 51mm I think

    same as the front ( what ever that is)
     
  6. ERICZZ

    ERICZZ Karting

    Aug 26, 2005
    127
    New Hartford
    Full Name:
    ERIC Z
    Mike what did you use for lug bolts ? stock ? or something else ?
     
  7. julian_blk348

    julian_blk348 Karting

    Nov 21, 2003
    112
    Austin TX
    Full Name:
    Julian
    When putting 360 wheels on your 348, you will need to stay with the original OEM lugs from the 348.
     
  8. BT

    BT F1 World Champ
    Lifetime Rossa

    Mar 21, 2005
    15,291
    FL / GA
    Full Name:
    Bill Tracy
    I think the rear bolts for his spider are longer than those on my 348 ts. The wheel on the spider has a larger offset cast into the hub and I think it uses longer bolts.
    BT
     
  9. elgin328

    elgin328 Formula 3

    Apr 11, 2004
    1,034
    near Atlanta
    Full Name:
    Mark

    Yes, that is correct. (Sorry for the bad info. I forgot the rear wheels were different.)
     
  10. ERICZZ

    ERICZZ Karting

    Aug 26, 2005
    127
    New Hartford
    Full Name:
    ERIC Z
    Direct bolt on confirmed stock lugs , They look insane ! I never had the factory rear wheel with the big lugs . Car has a much better feel I am unsure if it's the weight diffence in the wheels or the larger contact patch .Anyone need a set of factory wheels I have 2 sets chrome or silver Kumho's or P zero's also a set of hill spacer 25mm rear and 15 mm front with lugs . Will mix and match to sell one set .
     
  11. ERICZZ

    ERICZZ Karting

    Aug 26, 2005
    127
    New Hartford
    Full Name:
    ERIC Z
  12. elgin328

    elgin328 Formula 3

    Apr 11, 2004
    1,034
    near Atlanta
    Full Name:
    Mark
    that looks great !!!!!!!!!!!
     
  13. BT

    BT F1 World Champ
    Lifetime Rossa

    Mar 21, 2005
    15,291
    FL / GA
    Full Name:
    Bill Tracy
    Very nice!
    :)
    BT
     
  14. MDshore348

    MDshore348 Formula 3

    Dec 24, 2004
    2,460
    Maryland
    Full Name:
    Darron
    #14 MDshore348, Jul 2, 2006
    Last edited by a moderator: Sep 7, 2017
  15. davey_jones

    davey_jones Formula Junior

    Sep 28, 2002
    781
    wherever it's sunny
    Full Name:
    Dave
    HEY! I like that pic!
    Do you have a larger high res version of that pic you can send me??
     

Share This Page