360CH and Video VBox | FerrariChat
Buy

360CH and Video VBox

Discussion in 'Technical Q&A' started by goober, Nov 9, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. goober

    goober F1 World Champ

    Nov 15, 2004
    15,895
    Adelaide & Thredbo
    Full Name:
    Buddy Miles
    #1 goober, Nov 9, 2011
    Does anyone know where to connect the "can" point from a Video Vbox camera unit to the "can" point on a 360ch for data logging?
     
  2. FerrariDublin

    FerrariDublin F1 Rookie

    Jun 14, 2009
    3,457
    Dublin, Ireland
    Full Name:
    Greg
    #2 FerrariDublin, Nov 10, 2011
    Can't help you I'm afraid. Maybe try posting in the Tracking and Driver forum section?

    Best
     
  3. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    29,263
    socal
    #3 fatbillybob, Nov 10, 2011
    Most loggers with that capability have an interface cable that plugs into the OBD2 port to access CANline. But the 360 is an early CANbus car and modern loggers sometimes cannot get or only get partial data from the CAN. So it is possible that your logger can read the 360. Under those conditions you will need a logger with analog inputs like a DL-1 so that you can physically wire in things like throttle position sensor or steering sensor.
     
  4. Mike Broadbent

    Mike Broadbent Rookie

    Nov 11, 2011
    1
    #4 Mike Broadbent, Nov 11, 2011
    Hi - Mike from Racelogic here.

    The 360 normally has CAN on OBD but we have found for some weird reason that this isn't always the case in the US. However, please contact [email protected] - we will be pleased to help :)
     
  5. goober

    goober F1 World Champ

    Nov 15, 2004
    15,895
    Adelaide & Thredbo
    Full Name:
    Buddy Miles
    #5 goober, Nov 13, 2011
    Thanks Mike, I have emailed racelogic.
     

Share This Page