360CS wheels on a 348 | Page 2 | FerrariChat
Buy

360CS wheels on a 348

Discussion in '348/355' started by plugzit, Aug 9, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. peterkarvelas

    peterkarvelas Karting

    Jun 2, 2006
    78
    RSA-Johannesburg
    #26 peterkarvelas, Aug 22, 2010
    The CS wheels really finish of the 348......I am of the opinion that the 348 has always looked awkward with the rear wheels arches looking empty with the standard 17" wheels.

    Those CS wheels are superb on the car.
     
  2. Philip Barnard-Browwn

    Philip Barnard-Browwn Karting

    Feb 25, 2007
    168
    london.
    Full Name:
    Philip Barnard-Brown
    #27 Philip Barnard-Browwn, Aug 22, 2010
    Last edited by a moderator: Sep 7, 2017
  3. jeffdavison

    jeffdavison F1 Rookie

    Jul 29, 2002
    2,544
    Suwanee Georgia
    Full Name:
    Jeffrey Davison
    #28 jeffdavison, Aug 22, 2010
    If 360CS wheels fit on a 348, will they fit on an F355?

    JD
     
  4. PAP 348

    PAP 348 Ten Time F1 World Champ
    Lifetime Rossa Owner

    Dec 10, 2005
    100,232
    Mount Isa, Australia
    Full Name:
    Pap
    #29 PAP 348, Aug 22, 2010
    They sure will. :):)
     
  5. plugzit

    plugzit F1 Veteran
    Silver Subscribed

    Dec 1, 2004
    7,792
    Redondo Beach, CA
    Full Name:
    Bruce Bogart
    #30 plugzit, Aug 22, 2010
    Haven't received them yet...maybe tomorrow. Can't wait to see how they look in person on the car.
     
  6. FandLcars

    FandLcars F1 Rookie

    Aug 6, 2006
    3,057
    Tempe, Az
    Full Name:
    Rick Schumm
    #31 FandLcars, Aug 22, 2010
    The 360CS wheels look good on the 348, and I feel the reason is that the "spokes" match the 348 cheese graters pretty well. But I feel 5-spoke wheels are traditional on Ferraris, so I plan to keep my challenge wheels!
     
  7. plugzit

    plugzit F1 Veteran
    Silver Subscribed

    Dec 1, 2004
    7,792
    Redondo Beach, CA
    Full Name:
    Bruce Bogart
    #32 plugzit, Aug 27, 2010
    Last edited by a moderator: Sep 7, 2017
  8. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    29,263
    socal
    #33 fatbillybob, Aug 27, 2010
    Bruce...you better add these pics to the "best mod for a 348" thread. These look very very good and update the look better than the 355CH wheels that I love so much. what size are these wheels? 18"? If so I got some rubber for you BUT it ain't for the street and you better wear your old man neck collar because these baby's can pull so G'S!
     
  9. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    29,263
    socal
    #34 fatbillybob, Aug 27, 2010
    One day when you are over I'd like to see if those fit the 550.
     
  10. Kaivball

    Kaivball Three Time F1 World Champ
    Owner

    Jan 11, 2007
    35,997
    Kalifornia
    #35 Kaivball, Aug 27, 2010
    Last edited by a moderator: Sep 7, 2017
  11. ferrame

    ferrame Formula 3

    Mar 2, 2005
    1,196
    Orange, Calif
    #36 ferrame, Aug 27, 2010
    Hey Bruce,

    You can get the whole brake upgrade from Stoptech to fill those gaps.
     
  12. speedtrapp

    speedtrapp Formula Junior

    Mar 26, 2007
    308
    Full Name:
    Tommy
    #37 speedtrapp, Aug 27, 2010
    Bruce, did you notice if there was any rubbing problems? going from 17 to 19 inch wheels is OK ? they look great BTW
     
  13. plugzit

    plugzit F1 Veteran
    Silver Subscribed

    Dec 1, 2004
    7,792
    Redondo Beach, CA
    Full Name:
    Bruce Bogart
    #38 plugzit, Aug 27, 2010
    No problem

    Haven't done any spirited driving yet with these, but I can tell you I have some 315/30/18s on 11.5" wheels that don't rub. These are 285/35/19s. We'll see.
     
  14. plugzit

    plugzit F1 Veteran
    Silver Subscribed

    Dec 1, 2004
    7,792
    Redondo Beach, CA
    Full Name:
    Bruce Bogart
    #39 plugzit, Jun 15, 2011
    Cut 10mm off the face of the rears. They now look perfect. This weekend will determine if the rubbing is completely cured. They rubbed at full compression on the front of the wheelwell lip with 285/35/19s. It took me a while to decide to do it, since I was dogged by that old Ferrari-owners gremlin "value". Screw it. My car, my wheels, I'm gonna do it. Did. Glad I did. I'll post pics later.
     
  15. junglistluder

    junglistluder F1 Rookie
    Owner Silver Subscribed

    Mar 23, 2007
    3,631
    VA
    Full Name:
    Brendan
    #40 junglistluder, Jun 15, 2011
    Did you take them to a machine shop? Would love to see pics!
     
  16. Chupacabra

    Chupacabra F1 Rookie
    Owner Rossa Subscribed

    Sep 30, 2005
    3,583
    Behind a drum kit
    Full Name:
    Mr. Chupacabra
    #41 Chupacabra, Jun 15, 2011
    WOW! The CS wheels look great! Well done!
     
Page 2 of 2

Share This Page